| |
|
|
|
|
|
|
|
|
Universal
Direct Drill Planters |
|
|
|
Q1.
What Widths are your Machines made in?
|
|
We
have built machines in most sizes sizes up to 75'. If you
have a special requirement we will be happy to discuss
this with you. |
|
Q2.
What Tyne breakout do you have? |
| |
|
We
currently have 91kg/200lb, 136kg/300lb, 182kg/400lb,
227kg/500lb Breakout Tynes with Spring Release and 227-386k/500-800lb
Variable Hydraulic
Release
Tynes. |
|
| |
Q3.
Can the Breakout be adjusted? |
| |
|
| |
The
breakout on spring release tines is pre-set before leaving
the factory. We have a hydraulic breakout tyne which
is adjustable between 227-386kg/500-650lbs.
|
| |
Q4.
Can bigger Tyres be fitted for better Floatation? |
| |
|
| |
Good
used super single tyres are available if required at no
extra
cost. Wide or floatation tyres can be used as an option depending
upon frame design.
|
| |
|
| |
Q5.
Do Janke have a Floating Hitch available? |
| |
|
| |
Yes, Janke have developed a Hydraulic Floating Hitch
which provides better ground following than machines with wheels outside the frame and available as an option. |
| |
|
|
| |
Q6.
Can you fit other brand of points to Janke Tynes? |
| |
|
| |
Janke
planting tynes are designed to fit the Janke range of
planting
points. However, if you have different requirements we
would be happy to discuss this with you.
The Planting Tynes can be removed from the Tyne Head and
be replaced with Cultivating Tynes if required with a simple
pin adjustment. |
| |
|
| |
|
